Clearing Over 1 Shot
Can I clear coat over 1 Shot Lettering Enamels?
Yes. It's important that your paint is completely dry prior to overcoating. We recommend that you use our 1 Shot #4007 Hardener, and wait at least 24 hours prior to clearing. Adding up to 20% Hardener, with no other reducers, will allow for overcoating with automotive type urethane clears after 24 hours. Always apply the first two coats of clear very light and dry when clear coating.
Painting through a Mask
What should I know about painting 1 Shot Lettering Enamels through a mask?
When applying paint through a computer-generated or hand cut mask, always remove the masking material once the paint "tacks" (usually about 15-20 minutes), but before it dries.
MSDS
How do I obtain MSDS information regarding 1 Shot and Chromatic Products?
Visit MSDS.
Lettering Enamels vs. Bulletin Colors
What is the difference between 1 Shot Lettering Enamels and Chromatic Bulletin Colors?
1 Shot Lettering Enamels are engineered for and provide outstanding exterior durability when properly applies. Chromatic Bulletin Colors are intended for use on shorter-term exterior work, such as bulletins (more often called billboards today) as well as interior mural work.
Reducing & Thinning
What should I use for reducing 1 Shot Lettering Enamel?
To enhance flow characteristics, you can reduce with 1-Shot Reducers, available in low (ZZ6001) and high temp (ZZ6002) versions. Never use Mineral Spirits or synthetic enamel reducers.
Gloss Reduction
Can I reduce or eliminate the gloss of my 1 Shot Lettering Enamels?
Yes. Our 1 Shot / Chromatic #4329500 Flattening Paste can be used in varying ratios to reduce gloss, or even create a nearly dead flat finish.